Thank you for choosing Haneco SKYLUX G4/SL/SP Highbay.
We strongly recommend that you read this manual carefully before installation.
This installation guide is suitable for SKYLUX G4/SL/SP model.
Product Specification
SKYLUX
G4/SL/SP
HANECO LED HIGHBAY INSTALLATION GUIDE
For more information
www.haneco.com.au
1300 001 LED (533)
PRODUCT CODE
POWER
CCT
VOLTAGE/
FREQUENCY
IK/IP
RATING
OPERATING
TEMPERATURE
SKYLUX120W-G4
60/70/90/120
3000/4000/5000
220 - 240
50Hz - 60Hz
IK08
IP65
-35 - 50°C
SKYLUX200W-G4
100/150/170/200
3000/4000/5000
SKYLUX120W-SL
60/70/90/120
5000
SKYLUX200W-SL
100/150/170/200
5000
SKYLUX120W-SP
60/70/90/120
5000
SKYLUX200W-SP
100/150/170/200
5000
• Installation must be carried out by a licenced electrician and in accordance
with these instructions and relevant Australian standards and local regulations.
• Ensure input voltage conforms within product specifications.
• Ensure wires are securely connected.
• Before switching on, ensure all wires are correctly connected.
• The warranty is void if product is not installed according to the instructions.
Note: Product technical information and specification may change over time without prior
notice. For latest information, please contact our customer service or visit our website
www.haneco.com.au
WARNING
1. Ensure main power supply is switched off before commencing the installation.
2. Remove the IP65 cover to access the power and color dip switch. Push inward and turn counterclockwise to remove the IP65 cover as shown in
the figure below.
3. Set the desired power and color tone.
Note:
a) Only Skylux G4 model has the color switchable option.
b) Fitting are preset with it highest wattage. To adjust lower fitting wattage, turn the dip switch to ADJ.
4. Ensure to install the IP65 cover.
5. Screw the eye bolt on top of the luminaire.
6. Install optional accessories and desired mounting setting.
7. Install the luminaire onto the desired location.
Installation
Mounting Option
Ceiling or wall mount with bracket
Not Included (available as accessories)
,
Ceiling mounting with hook
Mounting bracket holes