HandyPort Usage
How to use the extended command set
Application Note
2013. 08. 01
AN-2010-6E
Page 1: ...HandyPort Usage How to use the extended command set Application Note 2013 08 01 AN 2010 6E ...
Page 2: ......
Page 3: ...1342 Verbose Mode HPS 110 0B23 0722 or 1322 Verbose Mode 1 2 Commands for Changing the Operation Mode If you want to use the extended command set you have to change the operation mode You can use a command LR for reading the status of operation mode for the button mode And you can use a command AT ZLR for the no button mode extended command mode To change the operation mode you can use a command L...
Page 4: ...er that the reset button will not be worked Actually you don t need to push the reset button to enter the setting mode But you shall use an AT Z command sequence For an example you shall use AT ZV instead of V Please refer to the manual of extended command set for further information 1 4 Changing the Operation Mode for the no button mode or extended command mode Step 1 Connect an HandyPort to a CO...
