8
3.4. Command Set
3.4.1. Command List for Local Device
Item
Syntax
Description
Remarks
1. Connecting
address
A
Addr
<Enter>
Set a remote device address for a
wireless connection.
A local and remote BD_ADDR
always need to be difference.
2. Baud rate
B
Baud Rate
Change the baud rate
Baud Rate - 0: 1200, 1: 2400, 2:
4800, 3: 9600, 4: 19200, 5: 38400,
6: 57600, 7: 115200
3. COM port
C
COM Port
This is only valid in connection
mode 2.
4. PIN code
E
PIN
<Enter>
Authentication Off: Type <Enter>
Authentication On: Type up to 11
characters
Paired adapters should have a
same PIN code.
5. Connection mode
M
mode
Set a connection mode
0: 1:1 Mode, 1: WAIT Mode, 2:
REGISTER and CONNECT Mode
6. Friendly name
N
name
<Enter>
Set a friendly name up to 11
characters.
7. Command for the
remote
O
Enter configuration mode for the
remote.
8. Parity Bit
P
parity
Set the parity bit.
0: None, 1: Odd 2: Even
9. Stop Bit
S
stop
Set the stop bit.
0: 1 Stop, 1: 2 Stop
10. View
V
Display configuration information
11. Exit
X
Apply changes.
12. Usage
?
Print the usage.
Waning!
If you push the RST button, the COM port of HPS-110 will be stored the factory setting.
