HandTop HT3200-UV K Series, Installation Instruction

Page: 106 / 113

105
Image 2
2.Operation
The conveyor belt rectifying device is with simple and tight design, during the
machine operation, it is user-friendly for customers. After the conveyor belt
assembled, the belt tightness can be adjusted by the adjusting screw on both sides of
the rectify roller
（
See image 3 and 4
）
, this adjustment will be finished by professional
technician before the printer been sent out the factory, normally the customer won’t
need to adjust again.
Image 3
（
Left end
）
Image 4
（
Right end
）
Slave roller
Adjusting screw
Alley key