Handspring Visor Visor Deluxe Handheld, User Manual

Page: 181 / 282

Chapter 7 Page 173
Beaming information
Your Visor handheld is equipped with an IR (infrared) port that you
can use to beam information to another Palm Computing platform
device that’s close by and also has an IR port. The IR port is located on
the side of the handheld, behind the small dark shield.
You can beam the following information between Palm Computing
platform devices:
■
The record currently displayed in Date Book, Address Book, To
Do List, or Memo Pad
Note: You cannot beam records from Date Book Plus.
■
All records of the category currently displayed in Address Book,
To Do List, or Memo Pad
■
A special Address Book record that you designate as your
personal business card, containing information you want to
exchange with business contacts
■
An application installed in RAM memory
To select a business card:
1. Create an Address Book record that contains the information you
want on your personal business card.
2. Tap the Menu icon .
3. Tap Record, and then tap Select Business Card.
4. Tap Yes.
To beam a record, business card, or category of records:
1. Locate the record, business card, or category you want to beam.
2. Tap the Menu icon .
3. Tap Record, and then tap one of the following:
The Beam command for an individual record
In Address Book only: Beam Business Card
Beam Category
4. When the Beam Status dialog box appears, point the IR port
directly at the IR port of the receiving handheld.
Tip:
For best results, Visor handhelds should be between 10
centimeters (approximately 4 inches) and 1 meter
(approximately 39 inches) apart, and the path between