H&S BOILER GUN BG44, Operating Manual

Page: 32 / 108

Page 20 BG44 Boiler Gun Operating Manual
3.5 M
OTORS
The BG44 Boiler Gun is powered by either a pneumatic
motor or an electric motor. The following subsections
explain how to set up each for operation.
3.5.1 Pneumatic motor
Do the following to prepare the pneumatic motor for
use (See Section 2.2 for controls):
1. Connect the air supply line to the in-line oiler/
filter end of the air hose assembly with the uni-
versal coupler. Secure with the lock pin.
2. Connect the air hose assembly to the pneumatic
drive motor using the quick disconnect coupler.
3.5.2 Electric motor
Do the following to prepare the electric motor for use
(See Section 2.2 for controls):
1. Verify that the speed control is set to low. The
selector switch should be at the single arrow
position.
2. Plug the drive into an OSHA certified power
source or consult a licensed electrician for addi-
tional power supply options.
F
IGURE
3-12. U
NIVERSAL COUPLER
(
TOP
)
AND QUICK
DISCONNECT
(
BOTTOM
)
F
IGURE
3-13. S
PEED CONTROL SET TO LOW