GB
76
General
This manual contains instructions about how the Handöl
30 series must be assembled and installed. To ensure
the function and safety of the stove, we recommend
that the installation is carried out by an authorised
technician. Our Handöl dealers can recommend suitable
technicians, information about our dealers can be found at
www.handol.eu
Instructions for lighting are also supplied with the stove.
Read them carefully and keep them safe for future use.
The stove is type approved and must be connected to a
chimney dimensioned for at least 350°C, the external
connection diameter is Ø150 mm. Supply air from the
open air should be used as combustion air.
Building application
Before installing a stove or erecting a chimney it
is necessary for you to make a building application
permission to your local authority. Ask your local
authority for advice regarding building regulations and
the application.
Structural support
Check that the wood joists are strong enough to bear
the weight of the stove and chimney. The stove and
chimney can usually be placed on a normal wooden joist
in a single occupancy house if the total weight does not
exceed 400 kg.
Hearth plate
To protect the floor from any embers the stove must be
placed on a hearth plate. If the floor under the stove is
flammable, it must be protected by a non-flammable
material which covers at least 300 mm to the front and
100 mm on each side.
The hearth plate can consist of natural stone, concrete
or 0.7 mm metal. A painted metal or glass hearth plate is
available as an accessory.
Chimney
The stove requires a draft in the chimney of at least –12
Pa. The draft is affected both by the length and area
of the chimney, and by how well sealed it is. Minimum
recommended chimney length is 3,5 m and a suitable
cross section area is 150-200 cm² (140-160 mm in
diameter). Carefully check that the chimney is sealed and
that there is no leakage around soot hatches and flue
connections.
Note that a flue with sharp bends and horizontal routing
reduces the draught in the chimney. Maximum horizontal
flue is 1 m, on the condition that the vertical flue length
is at least 5 m. It must be possible to sweep the full
length of the flue and the soot hatches must be easily
accessible.
Eldstadsbeklädnad
Rosterreglage
Asklåda
Förbränningsluftsreglage
Brasbegränsare
HANDÖL
In accordance with standards below
marking was affixed:
European Standard:
SE Quality Certification, P-marked:
NO Standard NS 3059:
DE and AT Standard DIN 18.891 and
Art 15a B-VG:
Type:
Nominal Output:
Fuel:
Minimun draught:
Flue gas temerature:
Energy efficiency:
Emission of CO in cumbustion products:
Distance to cumbustible wall (mm):
Follow the user’s instructions and use only recomended fuel
NIBE AB Box 134 SE-285 23 MARKARYD SWEDEN
2007
EN 13240
Cert no 0112/07
SINTEF 110-0275
RRF-40 07 13 90
Handöl 31/31A/32/32A
5 kW
Wood
12 Pa
280°C
78%
0,14%
Behind 150
Beside 450
Corner 150
HANDÖL
NIBE AB SE-85 21 Markaryd Sweden
Type:
Production no.
50-series
7090300236
Technical specifications
Output
3-7 kW
Nominal output 5 kW
Efficiency
up to 80%
Model
34T
35T
Weight
(kg)
320
250
Width
(mm)
550
550
Depth
(mm)
430
430
Height
(mm)
1600 1600
Tank stone
(kg)
70
70
Connector diameter Ø150 mm ext.
Type approved in accordance with:
European standard EN-13240
Swedish environmental and quality marking, P-marking cert.
no. 0112/07
Norwegian standard NS 3059, SINTEF 110-0275
German standard DIN 18.891, RRF-40 07 13 90
Rating plate
Fire bars
Hearth cladding
Grate control
Combustion air control
Ash-pan
