Handlink WG-500P 24Roam, User Manual

Page: 14 / 91

WG-500P Hotspot in a Printer
2 Installation
2-1 Connecting the Antennas
The WG-500P 24Roam provides two antenna connectors on the rear of the unit.
2-2 Installation Requirements
Before installing the WG-500P 24Roam, make sure your network meets the
following requirements.
System Requirements
The WG-500P 24Roam requires one of the following types of software:

Windows 98 Second Edition/NT/2000/XP/Vista

Red Hat Linux 7.3 or later version

MAC OS X 10.2.4 or later version

Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol
installed)

Standard phone line for xDSL modem Or Coaxial cable for Cable modem

Web Browser Software (Microsoft I.E 5.0 or later version or Netscape
Navigator 5.0 or later version)

One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet
card

UTP network Cable with a RJ-45 connection (Package contents)
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all
connections. Make sure each cable not exceed 328 feet (Approximately 100 meters).
13