Handlink Technologies GW-1 User Manual Download Page 80

Page: 80 / 89

3-4-2

Firmware Upgrade

The Firmware Upgrade menu loads updated firmware to be permanent in flash ROM. The download file

should be a binary file from factory; otherwise the agent will not accept it. After downloading the new

firmware, the agent will automatically restart it.

Manual Firmware Upgrade

Figure 74 Manual Firmware Upgrade Setting Screen

Default

Description

Item

This allow

istrator to

the firmware via HTTP.

admin

upgrade

Local PC File Path

Empty

Enter the file name and location in the Local PC File Path

field.

This allows administrator use TFTP s

o upgrade firmware.

erver t

Remote TFTP Server IP

Empty

Enter the IP address of TFTP

Address

Server.

File Name

Empty

Enter the file name in the File Name field.

Note:

1. Before downloading the new firmware, users must save the configuration file for restore

rade process. This will damage the unit.

configuration parameters of the device.

Do not turn the power off during the upg

Easy Hotspot Kit

Summary of Contents for GW-1


























































































Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands

Handlink Technologies GW-1, User Manual

Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands