Handlink Technologies GW-1 User Manual Download Page 11

Page: 11 / 89

Installation

The followings are instructions for setting up the GuestWiFi. Refer to the illustration and follow the

simple steps below to quickly install your GuestWiFi.

Wall-Mounting

The GuestWiFi can be wall-mounted on a wall by applying the two mounting brackets on screws.

Figure 4 Wall-Mounting Bracket - Bottom of GuestWiFi

Please refer to the following instructions for mounting a GuestWiFi on a wall or other surface.

1. Install two screws on a wall according to the relative positions shown below.

Figure 5

2. Hang GuestWiFi on the wall by sliding the two screws in the mounting brackets.

Note: If the screws are not properly anchored, the strain of the cables connected to the GuestWiFi rear

panel connectors could pull out the GuestWiFi from the wall.

Easy Hotspot Kit

Summary of Contents for GW-1


























































































Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands

Handlink Technologies GW-1, User Manual

Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands