Manual no: 00744 En Ver. 2 101116
BariSling has been designed for lifting persons weighing 200 kg or more. It can be used in combination with mobile or
stationary (overhead) lifts, with a four-point slingbar or with a BariTurn. BariSling has six suspension points. It has two
slingbar loops at the back and four below, under the legs, to distribute pressure comfortably and safely.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for different
types of lifting and for patients with different needs. The slings are available in several different materials and in sizes. All
models are safe and very easy to use. The choice of model and material depends on the patient’s needs and the transfer
situation.
Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that
seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device
and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be
discarded.
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the sling’s
back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
Functional inspection
Always read the manual
Manual - English
Max load: 300kg/660lbs
BariSling
System
RoMedic
TM
SWL: 570kg/1250lbs
