Handicare Raptor, Service Manual, Page: 81 / 163

E
GIS
SK75326/6
PG
DRIVES TECHNOLOGY
50
4 Wiring
You are responsible for establishing the suitability of the particular wiring arrangement
used on the scooter. PG Drives Technology can make general recommendations for
wiring to Tiller Modules, but PG Drives Technology accepts no responsibility for the wiring
arrangement used.
4.1 Wire Gauge
The minimum recommended wire size is 0.22mm
2
for all connections.
4.2 Connectors
4.2.1 Surface Mount Variant
The Tiller Module is fitted with a Molex ‘Mini-fit jr’ 4 way connector.
See www.molex.com for your local distributor.
Part Numbers are as follows:
Molex ‘Mini-Fit-Jr.’ 4 socket receptacle: 39-01-2040
PG Drives Technology TruCharge Display Cable.
PGDT Part number: SA76199
Only use the PG Drives Technology TruCharge Display Cable
number SA76199 supplied with kit D50133.
Hand tools for crimping and extraction are available from Molex. The references are
as below.
Molex ‘Mini-Fit-Jr.’ Crimp tool: 69008-0724
Molex ‘Mini-Fit-Jr.’ Extraction tool: 11-03-0044
Only use the exact tools specified.
4.2.2 Inset Variant
The Tiller Module is fitted with a 3 way AMP CT series connector, part number 175487-
3. The mating crimps and connector housing have Amp part numbers 179227-1
and 179228-3 respectively. Only these parts should be used.
There is also a solder/ring tag point for an Electro-Static Discharge (ESD) drain path
wire.