Handicare Raptor, Service Manual, Page: 55 / 163

E
GIS
SK75326/6
PG
DRIVES TECHNOLOGY
24
Intech’s details are as below.
Tel: +44 (0)1522 869460
Fax: +44 (0)1522 869461
The connector part numbers are:
Hand tools for crimping and extraction are available from Intech, the references are
as below.
Crimp tool for 0.5-1.0mm
2
wire: ICT-249
Crimp tool for 2.5-4.0mm
2
wire: ICT-531
Crimp tool for 6.0-10.0mm
2
wire: ICT-532
Extraction tool for 0.5-1.0mm
2
wire: IET-503
Extraction tool for 4.0-6.0mm
2
wire: IET-552
Only use the exact tools specified
The High Current reference is available for customers who wish to use a 6.0 - 10.0mm
2
wire gauge.
For 6.0 - 10.0mm
2
crimp tools please refer directly to Amp.
Good quality crimping is essential in ensuring the long term reliability of the scooter’s
electrical system. Poor quality crimps may initially appear to be satisfactory but, over
time, they may cause problems. It is recommended that crimp quality is maintained
by implementing the procedures detailed in IEC-60352-2 1990.
Defective or poor quality crimps may affect the warranty of
the controller. PGDT accepts no liability for losses of any
kind arising from failure to comply with this condition.
For details of automatic crimp tools contact Intech.
Figures 1 and 2 give schematic details of the power connections.
3.2 Battery Connections
The controller incorporates sophisticated current limiting circuitry as protection for the
circuits in the controller.
Connector
Battery
Motor/Brake
D49712 PG80-B
D49925 PG80-SM
D50287 PG80-B (High Current)
D50009 PG80-SM (High Current)
IPG-5202-PS
IPG-5403-S
Intech
Reference
PG Drives Technology
Reference