6
A
A
MB3170-GB
Assembly
Figure 3
Figure 4
Figure 5
Assembly
As standard the wheelchair is supplied
fully assembled.
The only things you need to do are:
• Raise the backrest
• Fit the armrests
• Fit the leg supports
Raise the backrest
Figures 3, 4 and 5
• Pull out the bolt (3A)
• Locate the wires between the brackets
as shown in Figure 4. Place the bar
for the adjustment mechanism into the
bracket and replace the bolt
• Pull out the bolt (4A). Place the bar for
the pneumatic spring into the bracket
and replace the bolt, as shown in
Figure 5
• You can now raise the backrest to the
desired position. See page 9 for details
of how to adjust the sitting position by
changing the backrest angle and tilt