background image

2

www.handicare.com

MB3170-GB

Congratulations on your choice of new wheelchair.

Quality and functionality are the key concepts for all the wheelchairs in the 
Handicare range.

For your own safety, and in order for you to get the best possible benefit from the 
features of your new wheelchair, we recommend that you read this user manual 
carefully before you start to use the wheelchair.

Cirrus 4 in brief

Cirrus 4 was developed with special consideration for the fact that users have 
different needs and wishes, whether the chair is to be used simply as a comfort 
wheelchair or will be driven by the user. As the seat height is adjustable, it is also 
very suitable for people who use one or both legs to propel the chair forward. 
The wheelchair can be dismantled, and features removable leg supports and a 
collapsible backrest which make it easy to transport. Good rolling characteristics 
are combined with a safe and reliable chair. The design is anatomically correct, 
so that it is comfortable to sit in. The chair is virtually maintenance-free.

Introduction

This user manual is for Cirrus 4

with serial number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

The wheelchair was inspected and approved

on:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

by:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Summary of Contents for Cirrus 4









































Reviews: