18
A
A
A
MB3170-GB
Figure 30
Figure 32
Figure 31
Leg support fixing
Figure 30
The depth of the leg support fitting can be
adjusted or the support can be removed.
Loosen the screw (30A) using a 4 mm
Allen key. Pull or push the leg support to
the desired position. The leg support fitting
must not be pulled out more than 8 cm.
Re-tighten the screw.
Legrest – angle adjustment
Figure 31
The legrests can be adjusted separately.
• Loosen the locking handle (31A)
• Adjust the legrest to the desired angle,
and tighten the handle
Leg support – length adjustment
Figure 32
• Squeeze in the snap lock (32A) in the
square-profi le tubing at the same time
as pulling or pushing the footplate to the
desired length
Adjusting the wheelchair