handi quilter Avante QM30235, User Manual

Page: 24 / 40

Page 24
HQ
18
Avanté User Manual
Figure 43
Figure 44
System Information
Serial Number
HD108151976
Type
C-Pod
Handles
Board
2.00
1.00
Firmware
3.04
2.99
Stitch Counters
Lifetime
Project
000008375
000000000
Main Back
System Information
The serial number of the machine is displayed at the
top of the System Information screen. This number
matches the one found on the label at the back of the
machine under the rear handlebar.
Information contained in the white boxes below
the serial number identifies the electronics board
revision numbers as well as the firmware revision
numbers of the HQ
18
Avanté and its handlebars. The
Lifetime and Trip (or project) stitch counters count
the number of stitches the machine is performed.
The Lifetime count is the total number of stitches
made since the machine was built. The Trip Counter
can be reset to keep track of the number of stitches
made during a given project. To reset this counter,
press the blue “Reset” button just to the left of the
“Trip” box. The Lifetime counter cannot be reset and
should be used as an indicator to determine when
general machine maintenance should be performed
by an authorized Handi Quilter Representative.
(Figure 43)
Press the “Main” button to return to the “Regulated”
or “Manual” menu screen or the “Back” button to
return to the “More” menu screen.
Set Language
The HQ18 Avanté screens can appear in English,
French, German, or Spanish. On the More Screen,
press the lower-left button to cycle between English,
Français, Deutsch, and Español. After selecting your
preferred language, press Main to return to the Main
Screen.
Diagnostics Screen
Six different diagnostics tests can be performed
on the machine. These functions test the motion
encoders, the motor control functions, the key
switches and the internal position sensors.
(Figure 44)
Press the “Main” button to return to the “Regulated”
or “Manual” menu screen or the “Back” button to
return to the “More” menu screen.
Main
Diagnostics
Motor
Needle
X Motion
Speed
Keys
Y Motion
Back