manualshive.com logo in svg

Hand Held Products IMAGETEAM 5620, System Manual, Page: 40 / 180

Share
Download
Hand Held Products IMAGETEAM 5620 System Manual Download Page 40

1 - 24

IMAGETEAM™ 2020/5620 System Manual

Connecting the Base with USB

A base can be connected to the USB port of a computer.  

1. Connect the appropriate interface cable to the base and to the computer.

  

2. Program the base for the USB interface by scanning the appropriate 

programming bar code.

3. Verify the base operation by scanning a bar code from the 

Sample Symbols

 

in the back of this manual.

For additional USB programming and technical information, refer to Hand Held 
Products “USB Application Note,” available at 

www.handheld.com

.

Note: Without using the 9-volt external, power supply, the base only uses 

enough power from the host to operate the interface.  The scanner’s 
battery is not charged when in this mode.  Using the 9-volt, external power 
supply allows the scanner’s battery to be charged, and no power is drawn 
from the host.

Summary of Contents for IMAGETEAM 5620





















































































































































































Reviews:

No comments