HOME-ESS-LV-5.12K
Empowering Energy Clean And Affordable
4
Professionals
: personnel who are trained or experienced in equipment operations and are clear of the
sources and degree of various potential hazards in equipment installation, operation and maintenance.
Trained personnel
: personnel who are technically trained, have required experience, are aware of
possible hazards on themselves in certain operations and are able to take protective measures to
minimize the hazards on themselves and other people.
Operators
: operation personnel who may come into contact with the equipment, except trained
personnel and professionals.
●
The installation and operating environment must comply with international, national and local
standards for lithium batteries and with local laws and regulations.
●
Install in a location out of the reach of children.
●
Garage installation needs to be far away from the direction of vehicle travel, it is recommended to install
the energy storage on the wall above the body bumper to avoid an accidental collision.
●
When installing the battery in a basement, keep good ventilation. Do not place flammable or explosive
materials around the battery. It is recommended that the battery be mounted on the wall to avoid contacting
with water.
●
Install the battery in a dry and well-ventilated environment. Secure the battery on a solid and flat
surface.
●
Install the battery in a sheltered place or install an awning over it to avoid direct sunlight or rain.
●
Install the battery in a clean environment that is free from sources of strong infrared radiation, organic
solvents, and corrosive gases.
●
Precautions should be taken for installation in areas with frequent natural disasters such as floods,
mudslides, earthquakes and typhoons.
●
Keep the battery away from fire sources. Do not place any flammable or explosive materials around the
battery.
●
Keep the battery away from water sources such as taps, sewer pipes, and sprinklers to prevent water
seepage.
●
Do not install the battery in a position where it is easy to touch as the temperature of the chassis and
heat sink is high when the battery is running.
●
To prevent fire due to high temperature, ensure that the vents and the cooling system are not blocked
when the battery is running.
●
Do not expose the battery to flammable, explosive gas or smoke. Do not perform any operation on the
battery in such an environment.
●
Do not install the battery on a moving object, such as ship, train or car.
●
Do not install the system outdoors in a salt-affected area because the system may be corroded. A salt-
affected area is an area within 500m from the coast or affected by sea breeze. The area affected by the sea
breeze varies according to meteorological conditions (such as typhoons and seasonal winds) or
topographical conditions (such as DAMS and hills).
2.3 Installation Environment Requirements