ENGLISH
25
• Never attempt to lift a load at an angle or pull a load over the surface by using the product.
• Never use the product if it is damaged or not working properly.
• Only operate the product by hand.
• Replace any warning stickers that have become illegible or lost.
• Do not leave suspended loads unattended.
• Never attempt to extend the chain, or repair a damaged chain.
• During welding, ensure that the return current never passes through the chains.
• Never hit the lever.
• Never use an extender on the lever.
• Never use more than one lever block to lift a load.
TECHNICAL DATA
OPERATION
Maximum load
750 kg
Lifting
1. Set the selector in the UP position.
2. Move the lever.
Lowering
1. Set the selector in the DOWN position.
2. Move the lever.
Adjusting the chain length
1. Set the selector in the NEUTRAL position.
2. Release the catch, or pull the free end of the chain.
Releasing the catch
1. Set the selector in the NEUTRAL position.
2. Pull one end of the chain.
Locking the catch
1. Set the selector in the UP position.
2. Turn the catch anticlockwise, or pull the hook end of the chain until the catch locks.
WARNING!
• Never attempt to release the catch when the chain is loaded.
• Only replace the chain with a new one of the same type.
