4
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the Legs
2
Placing the Umbrella Cap
Attach the legs (C) to the table top (B) using bolts (AA),
spring washers (BB) and flat washers (CC). There are total
8 bolts, fully tighten the all bolts. Wrench (DD) is used in the
step.
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
Place the
umbrella cap on (A) the table top (B).
NOTE:
To avoid destroying the finish, do not put the
parts on the ground directly.
AA
B
A
C
C
C
BB
C
C
C
B