C
Installation (continued)
3
Installing the solar lights
NOTE
: Do not use a hammer to install the ground
stakes. This could cause damage to the solar lights.
□
Prepare a hole in the ground for each solar light.
Use a tool such as a screwdriver to prepare the
installation hole to ensure that the hole is not larger
than the ground stake (C).
□
Insert the solar light assembly into the prepared
hole.
Maintenance
REPLACING THE BATTERY
WARNING:
Only use NiMh rechargeable batteries
with these solar lights. Do not mix battery types.
CAUTION:
Do not use a smaller mAh battery as it
will affect performance. Larger mAh batteries are
acceptable. Ensure you have positioned the
batteries with the correct polarity (+) and (-).
NOTE
: Battery performance is affected by weather
and temperature. Expect reduced performance in
adverse conditions of cold, extreme cold, extreme
heat, plus humidity and dampness.
Twist off the top of the solar light assembly and remove the battery cover.
Remove the old batteries and clean the battery contacts on the new batteries and the solar lights.
Replace with new AA 1.2V 1000 mAh NiMh rechargeable batteries.
Replace the battery cover.
Twist the top of the solar head back onto the top of the solar light assembly.
□
□
□
□
□
5
WWW.HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Summary of Contents for P5100-01-06
Page 7: ...WWW HAMPTONBAY COM...
