5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
4
Adjusting the Light Direction
5
Secure the Fixture
□
Locate the 2 levers (5) on both side of the fixture
□
Rotate the lever (5) front and back by both hands to adjust the
light direction ( 0°- 15° )
□
Bury the fixture head (A) into the ground and pack soil tight
around the fixture
Care and Cleaning
□
Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.
□
To clean the fixture, use a dry or slightly dampened clean cloth.
□
Do not use cleaners with chemicals, solvents, or harsh abrasives, as damage to the fixture may occur.
Troubleshooting
Problem
Possible Cause
Solution
The lights do not turn on.
□
There is no power.
□
There is a disconnection or break in the wire.
□
The transformer setting is incorrect
□
Check the outlet and ensure that a
breaker or GFCI circuit has not been
tripped.
□
Follow the wires from the fixture and
ensure a continuous connected path
back to the transformer.
□
Check the settings on the
transformer.
The lights flicker.
□
There is a loose wire connector to the fixture.
□
Tighten the wire connector and
ensure the metal contacts pierce the
insulation on the low voltage cable
from the transformer.
The lights flicker (all
fixtures).
□
There is a loose connection at the transformer.
□
Unplug the transformer from the
outlet and visually inspect the
positive and negative connecting
posts. Each wire should be securely
screwed in and not in contact with
any other.
0°
