Top Vent Adaptor Kit & 4” (102 mm) to 6” (152 mm) Flue
Adaptor (approved for vertical installations only)
*In order to achieve the maximum rated efficiency of 78% HHV purchase of a top vent adaptor kit (GC60-920) is required.
Use the sheet metal screws provided to attach the kit to the rear of the unit as shown. Please see kit instruction manual for more
detailed installation instructions.
The stove must also be connected to a 6” (152 mm) Class A flue (where permitted) using the 4” (102 mm) to 6” (152 mm) Flue
Adaptor (4PVP-X6).
See separate instruction manual for complete details.
Note:
Part # 6DVL-ADT Simpson Duravent DVL adaptor would also be required to connect the 4" (102 mm) - 6" (152 mm) increaser
to class A chimney when going through the wall or ceiling when using Simpson Duravent Duraplus/Duratech chimney systems. Not
required with DuraTech Premium or DuraTech Canada. DTC ceiling supports feature a built-in flue extension which eliminates the
need for this Simpson Duravent DVL adaptor.
4PVP-X6
4’’ (102 mm) pipe
lengths to class A
chimney
GC60-920
Hampton GC60-2 Cast Pellet Stove Technical Manual
20
Hampton GC60-2 Cast Pellet Stove Technical Manual
20
