7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
3
Attaching the ball bearing
mechanism and chair frame
4
Completing the assembly
□ Place the chair frame (A) face down on
a flat, soft
surface.
Attach the ball bearing mechanism (E) to
the chair frame (A) by inserting four hex bolts (AA)
and metal washers (CC).
□ Tighten all the bolts completely by using the hex
wrench (EE).
□ Rotate the 2 plates of the ball bearing mechanism
at a 45 angle. Cover each bolt with the plastic bolt
caps (DD).
NOTE:
Each bolt should be tightened a few
revolutions at a time, alternating between bolts in a
cross corner (X) pattern, to ensure your chair is level.
□ Turn the chair into the upright position.