HAMPTONBAY.COM
Please contact 855-HD-HAMPTON for further assistance.
SKU 240-177 & SKU 240-204
2052 BLACK & 2052 WHITE
Use and Care Guide
Exterior Wall Lantern
TOOLS REQUIRED
HARDWARE INCLUDED
Hammer
Safety goggles
Phillips screwdriver
AA – Lock nut x 2
BB – Wire Connectors x 3 CC – Mounting bracket x 1
Flathead
screwdriver
Wire strippers
Electrical tape
DD – Ground screw x 1 EE – Outlet box screw x 2 FF – Mounting screw x 2
Silicon sealant
Ladder
PACKAGE CONTENTS
A – Screw x 2
B – Top cover x 1
C – Fixture body x 1
D – Small finial x 1
E – Large finial x 1
Installation
1
Assembling the fixture
2
Mounting the bracket
3
Connecting the wires
IMPORTANT:
You must supply a bulb for
this light fixture. 100 watt maximum medium-
base bulb or 26-watt maximum CFL equivalent.
See homedepot.com/lightingfacts for more
information.
□
Unpack the fixture and lay all parts on a
clean, soft surface.
□
Screw either the short (D) or long finial (E)
onto the bottom of the fixture body (C).
□
Install a light bulb (not included) into the
socket of the fixture body (C).
□
Place the top cover (B) onto the top of the
fixture body (C), aligning the holes.Secure
together using the screws (A).
CAUTION:
Disconnect the power by
turning it off at the circuit breaker or
removing the fuse at the fuse box.
□
Screw the two mounting screws (FF) into the
mounting bracket (CC). Mount the bracket
(CC) to the outlet box using the two outlet
box screws (EE). Ensure the threads of the
mounting screws (FF) are facing outside
when the mounting bracket (CC) is attached
to the outlet box.
□
Wrap the ground wire from the fixture around
the ground screw (DD) on the mounting
bracket (CC), and then connect the ground
wire from the fixture to the ground wire from
the outlet box.
□
Connect the white wire from the fixture to the
white wire (neutral wire) from the outlet box.
Connect the black wire from the fixture to the
black wire (live wire) from the outlet box.
Cover the three connections using the wire
connectors (BB).
□
Wrap the connections with electrical tape and
position the wires back inside the outlet box.
Square Wall Lantern
