11
Installing the
Light Kit
Fan without Light Kit
(Optional)
CAUTION
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE AT
FUSE BOX. TURNING POWER OFF USING THE FAN
SWITCH IS NOT SUFFICIENT TO PREVENT
ELECTRIC SHOCK.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
While holding the light kit assembly under
your fan, locate two single white and blue
wires in the switch housing labeled "
FOR
LIGHT
". Make the polarized plug connec-
tions:
- White to white
- Blue to black
Carefully push all wires back into the switch
housing, then install the light kit assembly onto
the switch housing with 3 screws provided. Be
sure to tighten all screws. (Fig. 20)
Install 1 x 13 watt compact fluorescent bulb
(included) into the light kit socket.
NOTE:
CFL bulbs are
NOT
dimmable.
Mount the glass shade to the light fixture by
unscrewing partway the thumbscrews on the
glass holder, insert the glass, then gently
tighten the thumbscrews by hand evenly to the
glass. DO NOT OVER TIGHTEN. (Fig. 20)
1.
2.
3.
4.
Disassemble the switch housing cover from the
light kit, you can keep the light kit for future
use.
Attach the plastic plug to the switch housing.
(Fig. 21)
Install the switch housing cover to the switch
housing with screws provided.
1.
2.
3.
Restore power and your light kit is ready for
operation.
5.
Figure 20
Figure 21
Light Kit
Assembly
Bulb
Glass Shade
Thumb Screws
Switch
Housing
Wire Connectors
Screws
Switch Housing
Cover
Plastic Plug
Switch Housing
