HAMPTON BAY 1005 711 234 Use And Care Manual Download Page 1

Page: 1 / 20

Visual instruction of how to install this fan:
Visit www.homedepot.com and enter either the Item or Model number to find
this fan and click the link of visual instruction in the product overview section.

USE AND CARE GUIDE

HAVENSTONE 52 IN. CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for

your home improvement needs. Thank you for choosing Hampton Bay!

Item #1005 729 948

1005 711 234

Model #YG763-BN

YG763-MBK

Summary of Contents for 1005 711 234





















Search results

Summary of Contents for 1005 711 234

Reviews:

Related manuals for 1005 711 234

Brands by name

Popular brands

HAMPTON BAY 1005 711 234, Use And Care Manual

Search results

Summary of Contents for 1005 711 234

Reviews:

Related manuals for 1005 711 234

Brands by name

Popular brands