Hammond XK-5, Owner'S Manual, Page: 86 / 170

*#1 :-
Owner’s Manual
86
#1
#2
#3
‹
CABINET NUMBER
❶
CABINET NUMBER (P)
Selects the Cabinet Number to use in the Patch.
Th e setting range is F1 to F8 (not-overwritable) and U1 to U8 (overwritable). If any of
the Leslie parameter are edited, “ * ” is displayed on the left side.
‹
LESLIE PARAMETERS
❷
CABINET NAME (L)
Sets the Cabinet Name by up to 10 characters.
Move the cursor with the [
W ][ X ] button and select letters with the [VALUE] knob. Al-
lowable values are: symbols, digits and the large and small Alphabet.
Th e name and following (L) parameters are not recorded until the Cabinet Macro is
recorded into memory (See the next paragraph.)
❸
SPEAKER (L)
Selects the virtual speaker type.
145:
Leslie 145, small rotary speaker system
147:
Leslie 147, large rotary speaker system
122:
Leslie 122, large rotary speaker system
PR-40: Hammond PR-40, stationary speaker system
❹ / ⓭
SLOW SPEED - HORN / DRUM (L)
Sets the rotor speed on the Slow mode.
MENU/EXIT
S S
X X
LESLIE
In this mode, the settings are made for the on-board Leslie E ff ect
and the External Leslie Speaker.
Th ere are many parameters related to the Leslie e ff ect, but they
cannot set each parameter every Patch by Patch.
Th e on-board Leslie parameters are grouped in macro-settings
called “CABINETS”. You select the CABINET NUMBER in the
Patches where this selection is saved as part of the Patch.
To locate this mode:
or, keep pressing either of the [BYPASS], [STOP], [FAST] buttons for a few seconds.
See “Function mode” (P. 68) for operation details.
CONCEPT OF THE CABINET NUMBER
One Cabinet is equivalent to a virtual Leslie
speaker made with the Leslie parameter.
This is a Patch parameter only in these func-
tion pages.
❶
❷
❸
❹ ❺ ❻ ❼ ❽ ❾ ❿ ⓫
⓬
⓭ ⓮ ⓯ ⓰ ⓱ ⓲ ⓳ ⓴
WOR
K IN
PRO
GRES
S