
*#1
:-
Owner’s Manual
18
An 11-pin type Leslie speaker can be directly connected to this keyboard.
Switch keyboard OFF before connecting the Leslie speaker.
CONNECTING THE 3 CHANNEL LESLIE SPEAKER
BASIC CONNECTION OF THE LESLIE SPEAKER
Connect the Leslie Speaker #2101/#2101mk2 and the Leslie 11-PIN jack on this key-
board with the exclusive 11-pin Leslie cable (not included).
1. Set the LESLIE - EXT. LESLIE CH at “3” (P. 87).
2. Make the setting of Tone Wheel organ.
3. Switch “ON” the [BYPASS] button, set the [STATIONARY VOLUME] of the
#2101/#2101mk2 at desired volume.
4. Repeat “ON/OFF” the [BYPASS] button with playing the keyboard, set the [RO-
TARY VOLUME] of the #2101/#2101mk2 at same volume which you can hear.
MIDI CONTROL OF THE LESLIE SPEAKER
To control the parameters of the Leslie Speaker #2101/#2101mk2 (
fi
ne adjustment of
the rotor speed or the rise time, etc.):
1. Connect the MIDI OUT of this unit with the MIDI IN of the Leslie speaker with a
MIDI cable.
2. Set the keyboard channel - UPPER and the Leslie MIDI channel to the same channel
(P. 128).
When this unit detects that the Leslie speaker is connected, the Leslie parameters sent
through MIDI from this unit are switched from the XK-5 original to those for the Leslie
speaker.
L / MONO
LINE OUT
USB
MIDI
R
CTRL 1
CTRL 2
PEDAL
EXP.
ONLY
EXP-100F
NORM.
POLARITY
REV.
/OTHER
LOWER
FLASH DRIVE
TO
HOST
TO
PEDAL
IN 2
IN 1
OUT
LESLIE 11 PIN
FOOT CONTROLLER
NORM.
POLARITY
REV.
UPPER
BANK KEY
PATCH
PEDAL
LOWER
CONNECTING THE LESLIE SPEAKER
LESLIE SPEAKERS TO BE CONNECTED
This keyboard is designed to connect with
3 channel Leslie speakers such as the model
#2101. However, it is also possible to connect
1 channel type Leslie speakers such as #3300
sending the stationary channels to the LINE
OUT jacks independently. (P. 87)
LESLIE CHANNEL
3 channel type Leslie speakers are equipped
with a stereo speaker system, independent of
the rotor, to provide direct organ sounds.
A traditional 1-channel Leslie, such as a #122
or #147 has no stationary speaker system, re-
quiring a separate ampli
fi
er/speaker for the
direct organ sounds.
11-pin Leslie Cable
MIDI Cable (if needed)
Summary of Contents for XK-5
