Hammond XK-5, Owner'S Manual, Page: 118 / 170

*#1 :-
Owner’s Manual
118
MIDI STRUCTURE
Map of the
MIDI structure
on
:-
Non-Keyboard Extended
Organ
Section
Internal Keyboard
Octave Shift (int. zone)
Octave Shift (part)
Octave Shift (ex. zone)
MIDI Channel
Sounding Zone (part)
LC
LC
LC
LC LC LC
Local Control
Local Control
ExZone 3
ExZone 2
ExZone 1
Upper
Manual Bass
Lower
Split Point
Upper Kbd. Contacts
to USB
HOST
1st
2nd
3rd
Lower Kbd. Contacts
1st
2nd
3rd
Pedal Kbd. Contacts
1st
2nd
3rd
to MIDI
OUT
Th is keyboard has “Keyboard Channels” to transmit playing information of the key-
boards and “External Zone Channels” to control external MIDI equipment on the
keyboards.
‹
KEYBOARD CHANNELS
Th e Keyboard channels transmit the playing information of the Upper, Lower and Pedal
parts. Th ese are used to exchange playing information with an external sequencer.
Th e Upper channel transmits keyboard and controller data.
‹
EXTERNAL ZONE CHANNELS
Th e External Zone channels are for using this keyboard as a simple master keyboard to
control the external MIDI equipment. Th ese are Patch parameters, and it is possible to
make di ff erent settings to each Patch.
Th ere are 6 external zones in total. 3 zones for the Upper, 2 for Lower, and 1 for Pedal.
‹
EXPANDED KEYBOARDS
When a MIDI keyboard is used to expand the Lower and Pedal parts, they behave as if
the built-in keyboard on the keyboard, and, not only sounds the built-in sound genera-
tor, but also are transmitted through the MIDI OUT jack to the keyboard channels as
well as transmitted to the external zones.