Hammond XK-3C Owner'S Manual Download Page 76

Page: 76 / 126

*#1 :-%

Owner’s Manual

VIB&CHO (VIBrato and CHOrus)

In this mode, you can change the settings relating to each Effect for Vibrato and
Chorus.

To locate this mode:

1. Touch the [MENU/EXIT] button to display the MENU, select PAGE B by the [PAGE] button,

and then touch the [4] VIB&CHO button.

2. Or, hold down the Vibrato & Chorus [UPPER] or [LOWER] button for a while.

1. VIBRATO - RATE

This is for setting the Speed of the Vibrato and Chorus Effect.
The setting range is 6.10 - 7.25 Hz.

2. VIBRATO - TREMOLO

This is for setting the Tremolo (amplitude modulation) of the Vibrato and Chorus Effect.
The setting range is 0 - 15.

3. VIBRATO - EMPHASIS

This is for setting the Emphasis (high frequency boost) of the Chorus Effect (C1/C2/C3).
The setting range is 0 - 9dB.

4. to 9. VIBRATO - DEPTH V1 to C3

These are for setting the Depth of the each Vibrato and Chorus Effect mode.
The setting range is 0 - 15.

NOTE:

The parameters in these modes are Preset Parameters and are recorded to each Combination Preset.

Summary of Contents for XK-3C































































































































Search results

Summary of Contents for XK-3C

Reviews:

Related manuals for XK-3C

Brands by name

Popular brands

Hammond XK-3C, Owner'S Manual

Search results

Summary of Contents for XK-3C

Reviews:

Related manuals for XK-3C

Brands by name

Popular brands