Hammond XK-3C, Owner'S Manual

Page: 58 / 126

*#1 :-%
Owner’s Manual
58
In this mode, you can name your Combination Presets and determine how to recall
them.
To locate this mode:
Touch the [MENU/EXIT] button and display MENU, then touch the [PAGE] button to select
PAGE A and touch the [2] PRESET button.
PRESET
 PRESET NAME
1. Preset Name (P)
This allows you to name the present Combination Preset using up
to 10 letters.
Move the cursor by the [PARAM] button, and choose the letters
by the [VALUE] button or the [VALUE] knob.
This change will be lost if you do not record it, same as the other
Preset Parameters.
NOTE: The parameters by the names with (P) on the end are Preset
Parameters, and are recorded to each Combination Preset.
 PRESET LOAD
This allows you to set the operation when you depress the Preset
Key.
2. PRESET LOAD - UPPER (B)
This allows you to set whether or not to recall the Drawbar Reg-
istration of UPPER Part.
3. PRESET LOAD - LINK LOWER/PEDAL (G)
This allows you to determine whether or not to recall the Draw-
bar Registration of the LOWER and PEDAL Part.
4. PRESET LOAD - DRAWBAR (B)
This allows you to determine whether or not to recall the Param-
eters relating to the Drawbars of each Part, such as the Tonewheel
Set.
5. PRESET LOAD - PERCUSSION (B)
This allows you to determine whether or not to sound PERCUS-
SION with the Preset Keys other than [B] Key and recall the
Parameters relating to Percussion.
6. PRESET LOAD - INTERNAL ZONE (B)
This allows you to determine whether or not to recall the Param-
eters relating to the Internal Zone such as SPLIT or MANUAL
BASS.
7. PRESET LOAD - EXTERNAL ZONE (B)
This allows you to determine whether or not to recall the Param-
eters relating to the External Zone to control the external MIDI
equipment.
8. PRESET LOAD - EQ/RV (B)
This allows you to determine whether or not to recall the Param-
eters relating to the EQUALIZER and REVERB.
9. PRESET LOAD - ANI/OD (B)
This allows you to determine whether or not to recall the Param-
eters relating to VIBRATO, OVERDRIVE and LESLIE.
10. PRESET LOAD - KNOB & BUTTON (B)
This allows you to determine whether or not to recall the Param-
eters relating to ASSIGNABLE CONTROLLERS.
NOTE: Each Parameter (B) of Preset Load is a Bank Parameter (ex-
cept Link Lower/Pedal). It is set only for the BANK currently
selected. Link Lower/Pedal is a Global Parameter. It is com-
mon on all the BANKs.
3
1
2 3 4 5 6 7
8 9 10