manualshive.com logo in svg

Hammond XK-3, Owner'S Manual

Share
Download
Hammond XK-3 Owner'S Manual Download Page 41

Setting Up

41

EQUALIZER & REVERB

The Equalizer and the Reverb effects give the final touch to the tone.
The Equalizer regulates the tone, and the Reverb adds the resonance of the hall
performance.
You can control portions of their functions on the panel buttons and knobs

EQUALIZER

[TONE] KNOB

One optional Parameter out of the Equalizer is assigned and regulated.
When delivered from the factory, TREBLE is assigned, and, as you turn it to the right,
the treble is emphasized, and, to the left, the trebel is reduced.

[TONE TYPE] BUTTON

This assigns the settings to the [TONE] KNOB.
At every touch, the assignment changes in the order of TREBLE, MIDDLE and
BASS.  The initial letter of the word is displayed in the PLAY mode.

NOTE:

For further details, please read the section “EQUALIZER” (P.  72)

REVERB

[REVERB] BUTTON

This is for switching ON and OFF the Reverb Effect.
To get the Reverb Effect, press the button and the LED will light.

NOTE:

You can change the time and the depth of the Reverb. (P. 73)

The illustration indicates
TREBLE is at +9.

Summary of Contents for XK-3



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands