![background image](http://html1.mh-extra.com/html/hammond/eclipse-series/eclipse-series_assembly-instructions_3454455001.webp)
HAMMOND
MANUFACTURING
TM
TOOL BOX
www.hammondmfg.com
PAGE 1 OF 4
ECLIPSE SERIES
ASSEMBLY INSTRUCTIONS FOR
SWING PANEL AND SWING FRAME
BUL10120
REV. H
5/32 ALLEN KEY
3/8,7/16" Socket
Wrench
3/8 or 7/16
Open
Wrench
Centre
Punch
Drill, use
.281(7.1mm) BIT
PARTS LIST
PART #
QTY.
DESCRIPTION
1
1
SWING PANEL/FRAME
2
1
VERTICAL RAIL LOCK SIDE
3
1
VERTICAL RAIL HINGE SIDE
4
2
MOUNTING BRACKET (1)
5
2
MOUNTING BRACKET (2)
6
2-4
HINGE PIN
7
2-4
RUBBER PIN CAP
8
8
1/4-20 BUTTON HEAD SCREW
9
8
SEALING WASHER
10
4
1/4-20 CAGE NUT
11
4
1/4-20 SCREW
12
1
FINGER PULL
13
2
1/4 TURN LATCH
FIG. 1
1. Drill holes for mounting brackets. (Fig. 1)
a) Place mounting bracket on top left corner of enclosure. Mark two holes.
b) Place mounting bracket on bottom right corner of enclosure. Mark two holes.
c) Place mounting bracket on bottom left corner of enclosure. Mark two holes.
d) Place mounting bracket on top right corner of enclosure. Mark two holes.
e) Drill marked holes with 0.281" drill bit.
4
5
4
5
FLUSH WITH
FLANGE
Z
DETAIL Z
MARK THESE HOLES