Hammerhead 100XTR, Operator'S Manual

Page: 83 / 103

100XTR Operator’s Manual
Service Precautions
82 - Service
Service Precautions
Remove/Install Front Panel
Remove
1. Attach lifting chain to front panel (1).
2. Use equipment capable of supporting the front
panel size and weight to lift panel off the front
of the unit.
Install
1. Lower front panel near front of bursting unit.
2. Guide front panel over side tabs (2) to set in
place.
3. Remove lifting chain.
Misuse of machine can cause death or serious injury.
Read and understand operator’s manual and all other safety instructions
before use.
273-475
To help avoid injury:
• Unless otherwise instructed, all service should be performed with engine off.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
• Refer to US Occupational Safety and Health Administration (OSHA) guidelines for appropriate
lockout-tagout procedures.
Crushing weight could cause death or serious injury. Stay
away.
j51om022w.eps
1
2