Hammerhead 100XTR, Operator'S Manual, Page: 60 / 103

100XTR Operator’s Manual
Emergency Stop Procedure
Burst Pipe - 61
Emergency Stop Procedure
To shut down power unit engine under normal conditions, use key switch or emergency stop on power unit.
To shut down power unit using wireless remote controller, press the remote stop switch on wireless remote
controller.
To shut down power unit from down hole unit, press remote stop switch at down hole unit operator station.
Open/Close Bungee
Bungee operates automatically based on the mode set on wireless remote controller. In pullback mode,
bungee prevents forward rod movement. In payout mode, the bungee is open and free to move in either
direction.
Close Bungee
In manual mode, when bungee clamp is closed,
rod is locked in place and cannot move forward
or backward. To move rod forward, open bungee
clamp.
Use wireless remote controller to close bungee
clamp.
Pinch points can crush. Keep hands clear.
IMPORTANT: For unit components, see “Bursting Unit Components” on page 5. For controls, see
“Wireless Remote Controller” on page 34.
j51om008w21.eps