SEATS
DRIVER’S SEAT ADJUSTMENT
1. Lift the seat latch lever located under the left front edge of the driver’s seat.
2. While holding the lever upward, slide the seat forward or rearward to the
desired position, then release the lever.
3. Slide the seat forward and rearward to ensure the latch is engaged. Before
operating the vehicle, always make sure both seats are securely installed.
STEERING WHEEL
The steering wheel can be adjusted
upward or downward for rider
preference.
1. Loosen the steering wheel
adjustment bolt
q
.
2. Move the steering wheel upward or
downward to the desired position.
3. Hand-tighten the bolt.
SEAT BELTS
This HAMMERHEAD vehicle is equipped with seat belts for all riders. Always
make sure the seat belts are secured for the operator and passenger before
riding.
5-POINT SEAT BELT
To wear the 5-point seat belt properly, do the following:
1. Sit in the seat and place the shoulder belts over your shoulders. Make sure
the belts are not twisted. Push the latch plates into buckle until it clicks.
2. Secure the two lap belts. Push the latch plates into the buckle until they click.
Pull up on the strap to tighten. Then, attach the latch plate between legs.
Push the latch plate into the buckle until it clicks. Pull up on the strap to
tighten.
24
