4.
U
SE OF THE CRUSHER
4.1
M
OUNTING THE
TOP BRACKET
ON THE
CRUSHER
Carefully bring the top bracket close to the CRUSHER.
Align the pin housing holes.
Insert the pins in their respective seats and lock them with
washers and nuts (observe the position of the safety
blocks).
The tightening torques of the nuts depend on their size. In
this regard, see the table in § 6.6, "Tightening Torques of
Screws and Nuts".
To disassemble, carry out the steps described above in reverse order.
25
CRUSHER FR SERIES
