3.4
P
ROHIBITIONS
•
DO NOT carry or lift people on the CRUSHER.
•
DO NOT carry out maneuvers at risk that may cause the CRUSHER or its contents to tip over.
•
DO NOT change the setting of the maximum pressure valves in the hydraulic circuits.
•
DO NOT operate near live power lines, keeping a safe distance.
•
DO NOT remove or render illegible hazard, warning, attention and instruction decals; replace any
mentioned decal if it is damaged or illegible.
•
DO NOT allow anyone to get on the CRUSHER.
•
DO NOT modify or remove any part and/or component of the CRUSHER equipment.
•
DO NOT use the equipment with the protections removed.
•
DO NOT remove or inhibit safety devices.
•
DO NOT adjust mechanical elements or equipment while these are in motion.
•
DO NOT carry out repairs or maintenance with equipment in motion.
•
DO NOT transit and/or stop near the work area.
•
DO NOT modify any part of the equipment.
•
DO NOT swing the equipment during the shearing phase.
•
DO NOT use rotation during cutting.
•
DO NOT use the equipment vertically, with the risk of crushed rocks falling.
•
DO NOT hit the material during the work.
•
DO NOT push the material during the work.
21
CRUSHER FR SERIES
