Table of content
lmportant Safety Guidelines
lmportant Safety Guidelines
Read all instructions before using HAMMER BodyPedia Body Screen TX.
When using electrical appliance, basic safety precautions should always be followed, including the
following:
Read all instructions carefully before using this product. Retain this user manual for future reference.
lndividuals with medical implant devices such as pacemakers, or essential support devices such as patient
monitoring systems, must not use this equipment. Safe, low-level currents will flow through the body during
the test, which may cause malfunctioning of the device or endanger lives.
Bioelectrical lmpedance Analysis (BIA) uses safe low level currents, which are not harmful to the body
However, we do not recommend pregnant women test.
The scale surface may become slippery in humid places. Please watch your steps and don't slip.
Stand upright for about 5 minutes before testing. Taking the test immediately after lying in bed or sitting
for a long period of time might result in a slight change in the test results. This is because body water tends
to move to the lower body as soon as the person stands or gets up.
Do not eat before testing. ln cases where the examinee has already eaten, the test should be put off for
at least two hours after the meal. This is because food mass is included in the examinee' s weight and thus,
may result in measurement errors.
Use the bathroom before testing. Waste is not included in the body's compositional elements, but the
volume of urine and excrement is included in the weight measurement affecting accuracy of the test results.
Do not exercise before testing. Strenuous exercise or sharp movements can cause temporary changes in
body composition. Even light exercise can change your body composition temporarily.
Take the test in the morning, if possible. Body water tends to gravitate towards the lower body throughout
the day, affecting accuracy of the test results.
Take the test at the same time and same condition in each day to reduce test variables, if possible, to
achieve a coherent test record.
Thoroughly wipe the palms and soles with wet tissue/towel before testing. Testing may be difficult if the
examinee's palms and soles are too dry or if the examinee has too many calluses.
Put the HAMMER Body Screen TX on a leveled, hard and non-vibrating surface. Put the scale on an uneven
surface may cause the examinee to fall down. Test results may also be inaccurate.
Avoid contact with the examinee during testing. Contact may lead to interference affecting test results.
WARNINGS
CAUTION
Specifications
Getting to Know Your Body Screen TX
Display
App Installation
Using Your Body Screen TX
Care & Maintenance
Warranty
10
11
12
13
14
16
16
13
10
01
02
03
04
05
06
07
08