Hammer B3 e-classic User Manual Download Page 14

Page: 14 / 96

Hall in Tirol, 5.3.2015

Saw-Spindle Moulder

B3 / B3 e-classic

Manufacturer:

FELDER KG

KR-FELDER-STR.1

A-6060 Hall in Tirol

Product designation:

Kreissäge-Fräsmaschine

Make:

Hammer

Model designation:

B3 basic/winner/perform/e-classic

The following EC guidelines were applied:

2006/42/EG

2006/95/EG

2004/108/EG

The following harmonised norms were applied:

EN 940

The prototype test was carried out by:

DGUV Test

Prüf- und Zertifizierungsstelle Holz

Fachbereich Holz und Metall

Vollmoellerstraße 11

D-70563 Stuttgart

NB 0392

Conformity with the EC Machine Guidelines certified by:

Inspection certificate No. 115008

This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.

Modifying or altering the machine without the express written agreement of the manufacturer shall render the war-

ranty null and void.

The signatory of this statement is the appointed agent for

the compilation of the technical information

3 Declaration of Conformity

Declaration of Conformity

EG-Declaration of Conformity

according to Machine Guidelines 2006/42/EG

We hereby declare that the machine indicated below, which corresponds to the design and construction of the model

we placed on the market, conforms with the safety and health requirements as stated by the EC.

Johann Felder, Managing Director FELDER KG

KR-FELDER-STR.1 • A-6060 Hall in Tirol

Saw-Spindle Moulder

Summary of Contents for B3 e-classic

































































































Search results

Summary of Contents for B3 e-classic

Reviews:

Related manuals for B3 e-classic

Brands by name

Popular brands

Hammer B3 e-classic, User Manual

Search results

Summary of Contents for B3 e-classic

Reviews:

Related manuals for B3 e-classic

Brands by name

Popular brands