MTS SHOULDER PRESS Assembly Instructions
3
WARNING:
ONCE YOU UNBOLT THE BOTTOM SHIPPING BOLTS AS
DESCRIBED BELOW, THE SIDE PIECES OF THE MTS SHOULDER PRESS ARE
UNSTABLE AND WILL WANT TO FALL. THEY SHOULD BE SUPPORTED WHILE
THE BOLTS ARE REMOVED.
4. Using a ½” socket wrench, unbolt the bottom lag bolts on the left side as shown in Unpacking Figure 2.
“Walk” the side off of the shipping crate onto the floor. Make sure the side is stabilized as it will tip over
easily. Repeat this step for the right side piece. Remove and discard the shipping pallet and the lag bolts.
Unpacking Figure 2. Lag shipping bolts.
NOTE:
BE CAREFUL NOT TO DAMAGE THE FINISH OF THE MACHINE OR THE UPHOLSTERY
WHEN REMOVING THE PROTECTIVE PACKAGING MATERIAL.
