SAFETY
A fireguard conforming to BS 8423:2002
should be used in the presence of children
and old or infirm people.
Please note, this appliance should be used
with the fire door closed at all times except
when re-fuelling or de-ashing.
Do not use aerosol sprays or any other
flammable materials near the appliance
under fire.
Do not fit an extractor fan in the same
room as the appliance.
Fire cement is caustic, hand and eye
protection should always be worn,
prolonged contact with the skin should be
avoided.
Arada Ltd will not be responsible for any
consequential or incidental loss or
injury however caused.
Before continuing any further, with the
installation of this appliance please read the
following guide to manual handling.
Always obtain assistance when lifting the
appliance
When lifting always keep your back straight,
bend your back not your legs
Avoid twisting at the waist. It is better to
reposition your feet.
Avoid upper body/top heavy bending. Do
not lean forwards or sideways when
handling the fire
Always grip with the palms of your hands
do not use your fingertips for support
Always keep the stove as close to the body
as possible as this will minimise the
cantiliver action.
Use gloves to provide additional grip.
THE PRINCIPLE OF THE STOVE
Your Hamlet
stove
is built to the highest
standard of craftsmanship using the best
materials and the most modern equipment
available. It is a highly efficient and sophisticated
piece of machinery and when properly installed
and operated it should provide a lifetime of
heating satisfaction.
Safety is the most important consideration when
installing your fire. If not properly installed and
operated a house fire may result. Installation
must comply with the Building Regulations and
conform to all safety standards.
Hamlet
produce a variety of appliances ranging
from the traditional to the modern in style and
appearance, all bristling with „High Tech‟
features.
The fire door is fitted with a special high
temperature ceramic glass panel through which
the fire can be viewed.
The stove is lined with firebricks or heat
reflective panels which ensure complete
combustion and provide a good heat store to
even out fluctuations in burning.
An internal throat plate produces turbulence to
encourage secondary combustion and direct the
flue gas around the whole upper firebox before
allowing it to escape up the chimney.
Hamlet
stoves are also fitted with an „air wash‟
so called because it provides a curtain of high
speed preheated air behind the glass to help
keep it clean and provide secondary air/over
draught.
The provision of two inlets on all stoves gives a
wide range of primary / secondary air, under
draught/over draught combinations. The
optimum setting will only be established by
experience in firing the appliance, and will
depend on the type of fuel, the position of the
appliance in the house, and conditions of
chimney etc.
INTRODUCTION
5
Hamlet Camborne Deluxe Stoves
