Hamilton HTK Page 116 Programming Manual Download

Page: 116 / 135

Canadian Coin Programming

NOTE

Due to the fact that there are two types of Loonies and two types of Toonies, this will consume

(4) positions on the IDX coin mech, leaving only (2) positions left. In the chart below, the quarter and

token was added for reference.

Reference the “Programming IDX Coin Mech” procedure above. But use the following positions and

pulse scheme below.

Old style Looney

: Position 1 on the IDX, push the button one time for (1) pulse. Run 6 coin samples. Turn

the dial back to position “0”.

New Style Looney:

Position 2 on the IDX, push the button one time for (1) pulse. Run 6 coin samples.

Turn the dial back to position “0”.

Old Style Tooney:

Position 3 on the IDX, push the button one time for (1) pulse. Run 6 coin samples.

Turn the dial back to position “0”.

New style Tooney:

Position 4 on the IDX, push the button one time for (1) pulse. Run 6 coin samples.

Turn the dial back to position “0”.

Quarters:

Position 5 on the IDX, push the button one time for (1) pulse. Run 6 coin samples. Turn the

dial back to position “0”.

Tokens:

Position 6 on the IDX, push the button twice for (2) pulses. Run 6 coin samples. Turn the dial back

to position “0”.

Document #101-0243

116

02/01/18

Summary of Contents for HTK








































































































































Search results

Summary of Contents for HTK

Reviews:

Related manuals for HTK

Brands by name

Popular brands

Hamilton HTK, Programming Manual

Search results

Summary of Contents for HTK

Reviews:

Related manuals for HTK

Brands by name

Popular brands