Hamilton Beach Summit HBH850, Operation Manual

Page: 5 / 156

Control Panel
STOP button
Stops operation
of selected
function.
Does not shut
off power to
blender.
Custom cycle buttons A–D
Store favorite cycles and
recall them quickly using
buttons
A–D .
START button
Starts selected
cycle.
Display
See following
pages for status
messages.
UP/DOWN buttons
Press or button to
scroll through options in
display or to adjust settings.
POWER ON (I)/
OFF (O) button
Turns blender on and
off. May be located
on the side of select
models.
PULSE button
Press and hold
to run blender
at HIGH for
short bursts.
AUTOBLEND button
Blender automatically
stops when drink is at
right consistency.
JUMP button
Blender automatically
changes speed from
LOW to HIGH during
cycle.
LOW/HIGH buttons
Use to select
blending speed.
MORE
Press to display
additional text.
NOTE:
The display will show last cycle run when not in use.
5
NOTICE:
Ensure the Quiet Shield
™
is installed correctly. Breakage can occur if the dovetail joints along the
bottom edges of the Quiet Shield ™ are not properly interlocked with the upper base housing.
Align the dovetail joints
along the base of the
Quiet Shield
™ with the
cutout notches on the
upper base housing.
Slide Quiet Shield ™ into
place. If necessary, hold
the edges of the shield
open to ensure a secure fit.
Install thumbscrews to
secure Quiet Shield
™ to
upper base housing.
Properly Installing the Quiet Shield™