5
Know Your Coffeemaker
1.
Filter Cover/Bean Holder
2.
Top Cover Lock
3.
Finger Tabs
4.
Filter Basket/Grinder
5.
Reservoir
6.
Carafe
7.
Keep-Hot Plate
4
Control Panel
ON/OFF Button
•
Using Whole Beans: push
once
to
grind whole beans and brew ground
coffee.
• Using Pre-ground Coffee: push
twice
to bypass grind and brew
coffee only.
• If coffeemaker is on, push once to
turn off.
To Make Coffee with Whole Beans
The coffeemaker must be washed and thoroughly dried
after each use, particularly the filter cover/bean holder
and filter basket/grinder.
1.
Plug in coffeemaker and set the clock.
2.
Push top cover lock to open top cover. Fill reservoir with
desired amount of water. Care must be taken not to pour
water into the grinder part of the unit.
3.
Remove filter cover/bean holder. Place a #4 cone-shaped
filter in the filter basket. Replace filter cover/bean holder
and press down firmly in place.
4.
Add whole coffee beans to bean holder. We recommend
one (1) tablespoon of beans per cup of water. Close and
lock top cover. (Unit will not start unless cover is locked.)
NOTE:
You cannot remove the bean holder when it is full
of beans. They will spill.
5.
Press the ON/OFF button
once.
The Grind light will glow.
The coffeemaker will grind the beans and then automati-
cally stop the grinder.
6.
Then the Brew light will glow and the coffeemaker will
begin the brew cycle.
7.
When finished turn the coffeemaker off and unplug.
or greater than the rating of the coffeemaker. Care must be taken
to arrange the extension cord so that it will not drape over the
countertop or tabletop where it can be pulled on by children or
accidentally tripped over.
To avoid an electrical circuit overload, do not use another high
wattage appliance on the same circuit with your coffeemaker.
HOUR MIN. PROG.
AUTO BREW
ON/OFF
GRIND
ON/OFF
Button
