8
How to Use Single-Serve Side –
Brewing Coffee Grounds
w
CAUTION
Burn Hazard.
To avoid contact with hot coffee or water:
• DO NOT use more than 10 oz. (296 ml) of water for single-serve pack or 14 oz. (414 ml) for grounds. Too much water causes ERR message
and long beep. SOLUTION: Place carafe on warming plate. Turn brew selector dial to Carafe ( ). Press
l/ button to remove water. Turn
brew selector dial to single-serve side ( ). Add correct amount of water to water reservoir. Start brew process.
• Fill reservoir with cup or travel mug of water into which the coffee will be brewed.
• Fully insert cup or travel mug under brew basket.
• Remove single-serve pack holder before adding coffee grounds to brew basket.
• To avoid overflow, keep ground coffee below MAX fill line.
NOTE: It can take up to 2
minutes before brewed coffee
starts dispensing into your cup or
travel mug.
Fill reservoir with cup or travel
mug into which the coffee will be
brewed (maximum 14 oz. [414 ml]
water).
1
3
Plug in coffee maker. Rotate brew
selector dial to the right to select
Single-Serve ( ).
2
Summary of Contents for 2-Way FlexBrew
Page 39: ...39 Notes...
