12
Troubleshooting
Error Messages
PROBLEM
PROBABLE CAUSE/SOLUTION
All program buttons are
flashing.
•
The motor has overheated during use. Turn power switch
to OFF (
O
) and allow to cool for 15 minutes. Turn power
switch to RESET (
I
), and resume normal operation.
The SMOOTHIE ( ) and
ICE CRUSH (
) buttons
are flashing.
•
Remove the blender jar and lid. Stir contents and top with
lid. Press HOT SOUP ( ) cycle. If the problem persists,
turn unit off, unplug from electrical outlet, and contact the
customer service center.
The HOT SOUP ( ) and
WHOLE JUICE (
)
buttons are flashing.
•
The blender speed has ramped up to high too quickly
and run on high speed. Turn the unit off, unplug from the
electrical outlet, and call the customer service center.
Blender is plugged in
and switch is in ON (
I
)
position, but panel lights
are not illuminated.
•
Blender enters standby mode after 3 minutes of inactivity
to conserve power. Press any control panel button or
switch to resume normal operation.
NOTE:
Buttons start flashing 10 seconds after a problem has occurred.