20
USB Driver Installation
Fit the interface with the fastening screws previously
removed.
Fig. 2.4: Fastening screws
Fig. 2.3: Fitting the interface card
3 USB Driver
Installation
The actual USB driver can be downloaded from the Ha-
meg homepage www.hameg.com for free. The HO720
/ HO730 USB driver ZIP file includes a native USB and
virtual COM port driver
If a connection between PC and the instrument has been
established and no HMC USB-VCP driver is installed, the
operating system answers with “Found New Hardware”.
In addition, the “Found New Hardware Wizard” is displa-
yed. Only in this case the USB driver must be installed.
3.1 Installation with Windows XP™
Please choose “No, not this time” and click “Next”.
The following requirement for HO720 / HO730 USB driver instal-
lation are necessary:
1 An instrument with an activated USB interface.
2 A PC with operating system Windows XP™, VISTA™, Win-
dows 7™ or Windows 8™ (32 or 64Bit).
3 Administrator rights are necessary for the installation of the
driver. If an error message regarding spelling errors appears,
the rights to install the driver are not given. In this case,
please contact your IT department to obtain the necessary
rights.
Fig. 3.1: Assistent for new hardware search
